const Timer = require('../util/timer');
const Thread = require('./thread');
const execute = require('./execute.js');

class Sequencer {
    constructor (runtime) {
        /**
         * A utility timer for timing thread sequencing.
         * @type {!Timer}
         */
        this.timer = new Timer();

        /**
         * Reference to the runtime owning this sequencer.
         * @type {!Runtime}
         */
        this.runtime = runtime;
    }

    /**
     * Time to run a warp-mode thread, in ms.
     * @type {number}
     */
    static get WARP_TIME () {
        return 500;
    }

    /**
     * Step through all threads in `this.runtime.threads`, running them in order.
     * @return {Array.<!Thread>} List of inactive threads after stepping.
     */
    stepThreads () {
        // Work time is 75% of the thread stepping interval.
        const WORK_TIME = 0.75 * this.runtime.currentStepTime;
        // Start counting toward WORK_TIME.
        this.timer.start();
        // Count of active threads.
        let numActiveThreads = Infinity;
        // Whether `stepThreads` has run through a full single tick.
        let ranFirstTick = false;
        const doneThreads = this.runtime.threads.map(() => null);
        // Conditions for continuing to stepping threads:
        // 1. We must have threads in the list, and some must be active.
        // 2. Time elapsed must be less than WORK_TIME.
        // 3. Either turbo mode, or no redraw has been requested by a primitive.
        while (this.runtime.threads.length > 0 &&
               numActiveThreads > 0 &&
               this.timer.timeElapsed() < WORK_TIME &&
               (this.runtime.turboMode || !this.runtime.redrawRequested)) {
            numActiveThreads = 0;
            // Attempt to run each thread one time.
            for (let i = 0; i < this.runtime.threads.length; i++) {
                const activeThread = this.runtime.threads[i];
                if (activeThread.stack.length === 0 ||
                    activeThread.status === Thread.STATUS_DONE) {
                    // Finished with this thread.
                    doneThreads[i] = activeThread;
                    continue;
                }
                // A thread was removed, added or this thread was restarted.
                if (doneThreads[i] !== null) {
                    doneThreads[i] = null;
                }
                if (activeThread.status === Thread.STATUS_YIELD_TICK &&
                    !ranFirstTick) {
                    // Clear single-tick yield from the last call of `stepThreads`.
                    activeThread.status = Thread.STATUS_RUNNING;
                }
                if (activeThread.status === Thread.STATUS_RUNNING ||
                    activeThread.status === Thread.STATUS_YIELD) {
                    // Normal-mode thread: step.
                    this.stepThread(activeThread);
                    activeThread.warpTimer = null;
                    if (activeThread.isKilled) {
                        i--; // if the thread is removed from the list (killed), do not increase index
                    }
                }
                if (activeThread.status === Thread.STATUS_RUNNING) {
                    numActiveThreads++;
                }
            }
            // We successfully ticked once. Prevents running STATUS_YIELD_TICK
            // threads on the next tick.
            ranFirstTick = true;
        }
        // Filter inactive threads from `this.runtime.threads`.
        this.runtime.threads = this.runtime.threads.filter((thread, i) => {
            if (doneThreads[i] === null) {
                return false;
            }
            return true;
        });
        return doneThreads.filter(Boolean);
    }

    /**
     * Step the requested thread for as long as necessary.
     * @param {!Thread} thread Thread object to step.
     */
    stepThread (thread) {
        let currentBlockId = thread.peekStack();
        if (!currentBlockId) {
            // A "null block" - empty branch.
            thread.popStack();
        }
        while (thread.peekStack()) {
            let isWarpMode = thread.peekStackFrame().warpMode;
            if (isWarpMode && !thread.warpTimer) {
                // Initialize warp-mode timer if it hasn't been already.
                // This will start counting the thread toward `Sequencer.WARP_TIME`.
                thread.warpTimer = new Timer();
                thread.warpTimer.start();
            }
            // Execute the current block.
            // Save the current block ID to notice if we did control flow.
            currentBlockId = thread.peekStack();
            execute(this, thread);
            thread.blockGlowInFrame = currentBlockId;
            // If the thread has yielded or is waiting, yield to other threads.
            if (thread.status === Thread.STATUS_YIELD) {
                // Mark as running for next iteration.
                thread.status = Thread.STATUS_RUNNING;
                // In warp mode, yielded blocks are re-executed immediately.
                if (isWarpMode &&
                    thread.warpTimer.timeElapsed() <= Sequencer.WARP_TIME) {
                    continue;
                }
                return;
            } else if (thread.status === Thread.STATUS_PROMISE_WAIT) {
                // A promise was returned by the primitive. Yield the thread
                // until the promise resolves. Promise resolution should reset
                // thread.status to Thread.STATUS_RUNNING.
                return;
            }
            // If no control flow has happened, switch to next block.
            if (thread.peekStack() === currentBlockId) {
                thread.goToNextBlock();
            }
            // If no next block has been found at this point, look on the stack.
            while (!thread.peekStack()) {
                thread.popStack();

                if (thread.stack.length === 0) {
                    // No more stack to run!
                    thread.status = Thread.STATUS_DONE;
                    return;
                }

                const stackFrame = thread.peekStackFrame();
                isWarpMode = stackFrame.warpMode;

                if (stackFrame.isLoop) {
                    // The current level of the stack is marked as a loop.
                    // Return to yield for the frame/tick in general.
                    // Unless we're in warp mode - then only return if the
                    // warp timer is up.
                    if (!isWarpMode ||
                        thread.warpTimer.timeElapsed() > Sequencer.WARP_TIME) {
                        // Don't do anything to the stack, since loops need
                        // to be re-executed.
                        return;
                    }
                    // Don't go to the next block for this level of the stack,
                    // since loops need to be re-executed.
                    continue;

                } else if (stackFrame.waitingReporter) {
                    // This level of the stack was waiting for a value.
                    // This means a reporter has just returned - so don't go
                    // to the next block for this level of the stack.
                    return;
                }
                // Get next block of existing block on the stack.
                thread.goToNextBlock();
            }
        }
    }

    /**
     * Step a thread into a block's branch.
     * @param {!Thread} thread Thread object to step to branch.
     * @param {number} branchNum Which branch to step to (i.e., 1, 2).
     * @param {boolean} isLoop Whether this block is a loop.
     */
    stepToBranch (thread, branchNum, isLoop) {
        if (!branchNum) {
            branchNum = 1;
        }
        const currentBlockId = thread.peekStack();
        const branchId = thread.target.blocks.getBranch(
            currentBlockId,
            branchNum
        );
        thread.peekStackFrame().isLoop = isLoop;
        if (branchId) {
            // Push branch ID to the thread's stack.
            thread.pushStack(branchId);
        } else {
            thread.pushStack(null);
        }
    }

    /**
     * Step a procedure.
     * @param {!Thread} thread Thread object to step to procedure.
     * @param {!string} procedureCode Procedure code of procedure to step to.
     */
    stepToProcedure (thread, procedureCode) {
        const definition = thread.target.blocks.getProcedureDefinition(procedureCode);
        if (!definition) {
            return;
        }
        // Check if the call is recursive.
        // If so, set the thread to yield after pushing.
        const isRecursive = thread.isRecursiveCall(procedureCode);
        // To step to a procedure, we put its definition on the stack.
        // Execution for the thread will proceed through the definition hat
        // and on to the main definition of the procedure.
        // When that set of blocks finishes executing, it will be popped
        // from the stack by the sequencer, returning control to the caller.
        thread.pushStack(definition);
        // In known warp-mode threads, only yield when time is up.
        if (thread.peekStackFrame().warpMode &&
            thread.warpTimer.timeElapsed() > Sequencer.WARP_TIME) {
            thread.status = Thread.STATUS_YIELD;
        } else {
            // Look for warp-mode flag on definition, and set the thread
            // to warp-mode if needed.
            const definitionBlock = thread.target.blocks.getBlock(definition);
            const innerBlock = thread.target.blocks.getBlock(
                definitionBlock.inputs.custom_block.block);
            const doWarp = innerBlock.mutation.warp;
            if (doWarp) {
                thread.peekStackFrame().warpMode = true;
            } else if (isRecursive) {
                // In normal-mode threads, yield any time we have a recursive call.
                thread.status = Thread.STATUS_YIELD;
            }
        }
    }

    /**
     * Retire a thread in the middle, without considering further blocks.
     * @param {!Thread} thread Thread object to retire.
     */
    retireThread (thread) {
        thread.stack = [];
        thread.stackFrame = [];
        thread.requestScriptGlowInFrame = false;
        thread.status = Thread.STATUS_DONE;
    }
}

module.exports = Sequencer;