server/plugins/Geyser-Spigot/config.yml

# --------------------------------
# Geyser Configuration File
#
# A bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition.
#
# GitHub: https://github.com/GeyserMC/Geyser
# Discord: https://discord.geysermc.org/
# --------------------------------

bedrock:
  # The IP address that will listen for connections.
  # There is no reason to change this unless you want to limit what IPs can connect to your server.
  address: 0.0.0.0
  # The port that will listen for connections
  port: 19132
  # Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
  # This option makes the Bedrock port the same as the Java port every time you start the server.
  # This option is for the plugin version only.
  clone-remote-port: false
  # The MOTD that will be broadcasted to Minecraft: Bedrock Edition clients. Irrelevant if "passthrough-motd" is set to true
  # If either of these are empty, the respective string will default to "Geyser"
  motd1: "§7§lKaboom > §rFree OP - Anarchy"
  motd2: "§7§lKaboom > §rFree OP - Anarchy"
  # The Server Name that will be sent to Minecraft: Bedrock Edition clients. This is visible in both the pause menu and the settings menu.
  server-name: "Kaboom"
  # Whether to enable PROXY protocol or not for clients. You DO NOT WANT this feature unless you run UDP reverse proxy
  # in front of your Geyser instance.
  enable-proxy-protocol: false
  # A list of allowed PROXY protocol speaking proxy IP addresses/subnets. Only effective when "enable-proxy-protocol" is enabled, and
  # should really only be used when you are not able to use a proper firewall (usually true with shared hosting providers etc.).
  # Keeping this list empty means there is no IP address whitelist.
  # Both IP addresses and subnets are supported.
  #proxy-protocol-whitelisted-ips: [ "127.0.0.1", "172.18.0.0/16" ]
remote:
  # The IP address of the remote (Java Edition) server
  # If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
  # for plugin versions, Geyser will attempt to find the best address to connect to.
  address: auto
  # The port of the remote (Java Edition) server
  # For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
  port: 25565
  # Authentication type. Can be offline, online, or floodgate (see https://github.com/GeyserMC/Geyser/wiki/Floodgate).
  auth-type: offline
  # Allow for password-based authentication methods through Geyser. Only useful in online mode.
  # If this is false, users must authenticate to Microsoft using a code provided by Geyser on their desktop.
  allow-password-authentication: true
  # Whether to enable PROXY protocol or not while connecting to the server.
  # This is useful only when:
  # 1) Your server supports PROXY protocol (it probably doesn't)
  # 2) You run Velocity or BungeeCord with the option enabled in the proxy's main config.
  # IF YOU DON'T KNOW WHAT THIS IS, DON'T TOUCH IT!
  use-proxy-protocol: false

# Floodgate uses encryption to ensure use from authorised sources.
# This should point to the public key generated by Floodgate (Bungee or CraftBukkit)
# You can ignore this when not using Floodgate.
floodgate-key-file: public-key.pem

# The Xbox/Minecraft Bedrock username is the key for the Java server auth-info.
# This allows automatic configuration/login to the remote Java server.
# If you are brave enough to put your Mojang account info into a config file.
# Uncomment the lines below to enable this feature.
#userAuths:
#  BedrockAccountUsername: # Your Minecraft: Bedrock Edition username
#    email: javaccountemail@example.com # Your Minecraft: Java Edition email
#    password: javaccountpassword123 # Your Minecraft: Java Edition password
#    microsoft-account: true # Whether the account is a Mojang or Microsoft account.
#
#  bluerkelp2: 
#    email: not_really_my_email_address_mr_minecrafter53267@gmail.com 
#    password: "this isn't really my password"
#    microsoft-account: false

# Bedrock clients can freeze when opening up the command prompt for the first time if given a lot of commands.
# Disabling this will prevent command suggestions from being sent and solve freezing for Bedrock clients.
command-suggestions: false

# The following three options enable "ping passthrough" - the MOTD, player count and/or protocol name gets retrieved from the Java server.
# Relay the MOTD from the remote server to Bedrock players.
passthrough-motd: false
# Relay the protocol name (e.g. BungeeCord [X.X], Paper 1.X) - only really useful when using a custom protocol name!
# This will also show up on sites like MCSrvStatus. <mcsrvstat.us>
passthrough-protocol-name: false
# Relay the player count and max players from the remote server to Bedrock players.
passthrough-player-counts: false
# Enable LEGACY ping passthrough. There is no need to enable this unless your MOTD or player count does not appear properly.
# This option does nothing on standalone.
legacy-ping-passthrough: false
# How often to ping the remote server, in seconds. Only relevant for standalone or legacy ping passthrough.
# Increase if you are getting BrokenPipe errors.
ping-passthrough-interval: 3

# Whether to forward player ping to the server. While enabling this will allow Bedrock players to have more accurate
# ping, it may also cause players to time out more easily.
forward-player-ping: false

# Maximum amount of players that can connect. This is only visual at this time and does not actually limit player count.
max-players: 10000

# If debug messages should be sent through console
debug-mode: false

# Thread pool size
general-thread-pool: 32

# Allow third party capes to be visible. Currently allowing:
# OptiFine capes, LabyMod capes, 5Zig capes and MinecraftCapes
allow-third-party-capes: true

# Allow third party deadmau5 ears to be visible. Currently allowing:
# MinecraftCapes
allow-third-party-ears: true

# Allow a fake cooldown indicator to be sent. Bedrock players do not see a cooldown as they still use 1.8 combat
show-cooldown: true

# Controls if coordinates are shown to players.
show-coordinates: true

# The default locale if we dont have the one the client requested. Uncomment to not use the default system language.
# default-locale: en_us

# Configures if chunk caching should be enabled or not. This keeps an individual
# record of each block the client loads in. This feature does allow for a few things
# such as more accurate movement that causes less problems with anticheat (meaning
# you're less likely to be banned) and allows block break animations to show up in
# creative mode (and other features). Although this increases RAM usage, it likely
# won't have much of an effect for the vast majority of people. However, if you're
# running out of RAM or are in a RAM-sensitive environment, you may want to disable
# this. When using the Spigot version of Geyser, support for features or
# implementations this allows is automatically enabled without the additional caching
# as Geyser has direct access to the server itself.
cache-chunks: false

# Specify how many days images will be cached to disk to save downloading them from the internet.
# A value of 0 is disabled. (Default: 0)
cache-images: 0

# Allows custom skulls to be displayed. Keeping them enabled may cause a performance decrease on older/weaker devices.
allow-custom-skulls: true

# Bedrock prevents building and displaying blocks above Y127 in the Nether -
# enabling this config option works around that by changing the Nether dimension ID
# to the End ID. The main downside to this is that the sky will resemble that of
# the end sky in the nether, but ultimately it's the only way for this feature to work.
above-bedrock-nether-building: false

# Force clients to load all resource packs if there are any.
# If set to false, it allows the user to connect to the server even if they don't
# want to download the resource packs.
force-resource-packs: true

# Allows Xbox achievements to be unlocked.
# THIS DISABLES ALL COMMANDS FROM SUCCESSFULLY RUNNING FOR BEDROCK IN-GAME, as otherwise Bedrock thinks you are cheating.
xbox-achievements-enabled: false

# bStats is a stat tracker that is entirely anonymous and tracks only basic information
# about Geyser, such as how many people are online, how many servers are using Geyser,
# what OS is being used, etc. You can learn more about bStats here: https://bstats.org/.
# https://bstats.org/plugin/server-implementation/GeyserMC
metrics:
  # If metrics should be enabled
  enabled: false
  # UUID of server, don't change!
  uuid:

# ADVANCED OPTIONS - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING!

# Geyser updates the Scoreboard after every Scoreboard packet, but when Geyser tries to handle
# a lot of scoreboard packets per second can cause serious lag.
# This option allows you to specify after how many Scoreboard packets per seconds
# the Scoreboard updates will be limited to four updates per second.
scoreboard-packet-threshold: 20

# Allow connections from ProxyPass and Waterdog.
# See https://www.spigotmc.org/wiki/firewall-guide/ for assistance - use UDP instead of TCP.
enable-proxy-connections: false

# The internet supports a maximum MTU of 1492 but could cause issues with packet fragmentation.
# 1400 is the default.
# mtu: 1400

# Whether to use direct server methods to retrieve information such as block states.
# Turning this off for Spigot will stop NMS from being used but will have a performance impact.
use-adapters: true

config-version: 4