# Qualcomm Sahara / Firehose Attack Client / Diag Tools
(c) B. Kerler 2018-2021

## Why

- Because we'd like to flexible dump smartphones
- Because attacking firehose is kewl
- Because memory dumping helps to find issues :)
  
## Installation

- Get python >= 3.7 64-Bit

Linux/Windows: 
- ```cp Drivers/51-edl.rules /etc/udev/rules.d```
- ```cp Drivers/50-android.rules /etc/udev/rules.d```
- ```sudo apt install adb```
- ```sudo apt install fastboot```
- ```sudo apt install python3-dev```
- ```sudo sudo apt install liblzma-dev```
- ```sudo apt purge ModemManager```
- ```python -m pip install -r requirements.txt```

Mac: 
- ```brew install libusb```
- ```python -m pip install -r requirements.txt```

Windows:
- Boot device into 9008 mode, install Qualcomm_Diag_QD_Loader_2016_driver.exe from Drivers\Windows
- Use Zadig 2.5 or higher, list all devices, select QUSB_BULK device and replace
  driver with libusb >= 1.2.6.0 one (will replace original driver)
- Get latest Zadig release [here] (https://zadig.akeo.ie/)

## Convert EDL loaders for automatic usage

- Make a subdirectory "newstuff", copy your edl loaders to this subdirectory
- ```./fhloaderparse.py newstuff Loaders```

## Run EDL (examples)

### Generic

- ```./edl.py -h``` -> to see help with all options
- ```./edl.py server --memory=ufs --tcpport=1340``` -> Run TCP/IP server on port 1340, see tcpclient.py for an example client
- ```./edl.py xml run.xml``` -> To send a xml file run.xml via firehose
- ```./edl.py reset``` -> To reboot the phone
- ```./edl.py rawxml <xmlstring>``` -> To send own xml string, example : 
   ```./edl.py rawxml "<?xml version=\"1.0\" encoding=\"UTF-8\" ?><data><response value=\"ACK\" /></data>```
- ```./edl.py [anycommand] --debugmode``` -> enables Verbose. Only do that is REALLY needed as it will print out everything happening !

### For EMMC Flash

- ```./edl.py printgpt``` -> to print gpt on device with emmc
- ```./edl.py rf flash.bin``` -> to dump whole flash for device with emmc
- ```./edl.py rl dumps --skip=userdata --genxml``` -> to dump all partitions to directory dumps for device with emmc and skipping userdata partition, write rawprogram0.xml
- ```./edl.py rs 0 15 data.bin``` -> to dump 15 sectors from starting sector 0 to file data.bin for device with emmc
- ```./edl.py rs 0 15 data.bin --skipresponse``` -> to dump 15 sectors from starting sector 0 to file data.bin for device with emmc, ignores missing ACK from phones
- ```./edl.py r boot_a boot.img``` -> to dump the partition "boot_a" to the filename boot.img for device with emmc
- ```./edl.py r boot_a,boot_b boot_a.img,boot_b.img``` -> to dump multiple partitions to multiple filenames
- ```./edl.py footer footer.bin``` -> to dump the crypto footer for Androids with emmc flash
- ```./edl.py w boot_a boot.img``` -> to write boot.img to the "boot" partition on lun 0 on the device with emmc flash
- ```./edl.py wl dumps``` -> to write all files from "dumps" folder to according partitions to flash
- ```./edl.py wf dump.bin``` -> to write the rawimage dump.bin to flash
- ```./edl.py e misc``` -> to erase the partition misc on emmc flash
- ```./edl.py gpt . --genxml``` -> dump gpt_main0.bin/gpt_backup0.bin and write rawpartition0.xml to current directory (".")


### For UFS Flash

- ```./edl.py printgpt --memory=ufs --lun=0``` -> to print gpt on lun 0
- ```./edl.py printgpt --memory=ufs``` -> to print gpt of all lun
- ```./edl.py rf lun0.bin --memory=ufs --lun=0``` -> to dump whole lun 0
- ```./edl.py rf flash.bin --memory=ufs``` -> to dump all luns as lun0_flash.bin, lun1_flash.bin, ...
- ```./edl.py rl dumps --memory=ufs --lun=0 --skip=userdata,vendor_a``` -> to dump all partitions from lun0 to directory dumps for device with ufs and skip userdata and vendor_a partition
- ```./edl.py rl dumps --memory=ufs --genxml``` -> to dump all partitions from all lun to directory dumps and write rawprogram[lun].xml
- ```./edl.py rs 0 15 data.bin --memory=ufs --lun=0``` -> to dump 15 sectors from starting sector 0 from lun 0 to file data.bin
- ```./edl.py r boot_a boot.img --memory=ufs --lun=4``` -> to dump the partition "boot_a" from lun 4 to the filename boot.img
- ```./edl.py r boot_a boot.img --memory=ufs``` -> to dump the partition "boot_a" to the filename boot.img using lun autodetection
- ```./edl.py r boot_a,boot_b boot_a.img,boot_b.img --memory=ufs``` -> to dump multiple partitions to multiple filenames
- ```./edl.py footer footer.bin --memory=ufs``` -> to dump the crypto footer
- ```./edl.py w boot boot.img --memory=ufs --lun=4``` -> to write boot.img to the "boot" partition on lun 4 on the device with ufs flash
- ```./edl.py wl dumps --memory=ufs --lun=0``` -> to write all files from "dumps" folder to according partitions to flash lun 0
- ```./edl.py wl dumps --memory=ufs``` -> to write all files from "dumps" folder to according partitions to flash and try to autodetect lun
- ```./edl.py wf dump.bin --memory=ufs --lun=0``` -> to write the rawimage dump.bin to flash lun 0
- ```./edl.py e misc --memory=ufs --lun=0``` -> to erase the partition misc on lun 0
- ```./edl.py gpt . --genxml --memory=ufs``` -> dump gpt_main[lun].bin/gpt_backup[lun].bin and write rawpartition[lun].xml to current directory (".")

### For devices with peek/poke command

- ```./edl.py peek 0x200000 0x10 mem.bin``` -> To dump 0x10 bytes from offset 0x200000 to file mem.bin from memory
- ```./edl.py peekhex 0x200000 0x10``` -> To dump 0x10 bytes from offset 0x200000 as hex string from memory
- ```./edl.py peekqword 0x200000``` -> To display a qword (8-bytes) at offset 0x200000 from memory
- ```./edl.py pokeqword 0x200000 0x400000``` -> To write the q-word value 0x400000 to offset 0x200000 in memory
- ```./edl.py poke 0x200000 mem.bin``` -> To write the binary file mem.bin to offset 0x200000 in memory
- ```./edl.py secureboot``` -> To display secureboot fuses (only on EL3 loaders)
- ```./edl.py pbl pbl.bin``` -> To dump pbl (only on EL3 loaders)
- ```./edl.py qfp qfp.bin``` -> To dump qfprom fuses (only on EL3 loaders)


### For generic unlocking
- ```./edl.py modules oemunlock enable``` -> Unlocks OEM if partition "config" exists, fastboot oem unlock is still needed afterwards


#### Dump memory (0x900E mode)
- ```./edl.py memorydump```

### Streaming mode (credits to forth32)

#### Sierra Wireless Modem 
- Send AT!BOOTHOLD and AT!QPSTDLOAD to modem port or use ```modem/boottodwnload.py``` script
- Send AT!ENTERCND="A710" and then AT!EROPTION=0 for memory dump
- ```./edl.py --vid 1199 --pid 9070 --loader=loaders/NPRG9x35p.bin printgpt``` -> To show the partition table

#### Netgear MR1100
- run ```modem/boottodownload.py```, device will enter download mode (0x900E pid)
- ```./edl.py printgpt --loader=Loaders/qualcomm/patched/mdm9x5x/NPRG9x55p.bin```, device will reboot to 0x9008
- now use ./edl.py regulary such as ```./edl.py printgpt``` (do not use loader option)

#### ZTE MF920V, Quectel, Telit, etc.. Modem
- run ```modem/enableadb.sh```, or send to at port "AT+ZCDRUN=E", or send via ```./diag.py -sahara```
- ```adb reboot edl```
- ```./edl.py printgpt``` -> To show the partition table

### QFIL in linux console (credits to LyuOnLine):

- For flashing full image:
   ```
   ./qfil.py --log_level info --firehose prog_firehose_lite.elf --rawprogram rawprogram0.xml --patch patch0.xml --imagedir image_dir
   ```

## Install EDL loaders

- ```mkdir examples```
- Copy all your loaders into the examples directory
- ```./fhloaderparse.py examples Loaders``` -> will autodetect and rename loader structure and copy them to the "Loaders" directory
- Or rename Loaders manually as "msmid_pkhash[8 bytes].bin" and put them into the Loaders directory

## Run Diag port tools (examples)

For Oneplus 6T, enter *#801#* on dialpad, set Engineer Mode and Serial to on and try :

- ```./diag.py -vid 0x05c6 -pid 0x676c -interface 0 -info```

### Usage

- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -info``` -> Send cmd "00" and return info
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -spc 303030303030``` -> Send spc "303030303030"
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -cmd 00``` -> Send cmd "00" (hexstring)
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -nvread 0x55``` -> Display nvitem 0x55
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -nvbackup backup.json``` -> Backup all nvitems to a json structured file
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -efsread efs.bin``` -> Dump the EFS Modem partition to file efs.bin
- ```./diag.py -vid 0x1234 -pid 0x5678 -interface 0 -efslistdir /``` -> Display / directory listing of EFS


## Issues

- Secure loader with SDM660 on Xiaomi not yet supported (EDL authentification)
- VIP Programming not supported (Contributions are welcome !)
- EFS directory write and file read has to be added (Contributions are welcome !)

## Tested with

- Oneplus 3T/5/6T/7T/8/8t/N10/N100 (Read-Only), BQ X, BQ X5, BQ X2, Gigaset ME Pure, ZTE MF210, ZTE MF920V, Sierra Wireless EM7455, Netgear MR1100-10EUS, Netgear MR5100

Published under MIT license
Additional license limitations: No use in commercial products without prior permit.

Enjoy !